|
Assembling you new MoBike PG3
(Continued)
Preparation for riding your MoBike
Slide the carburetor choke lever to the up position.
Prime the carburetor by holding down the primer button until the fuel moves downward into in the fuel line or about 3 seconds.
You’re now ready to ride.
NOTE: Be sure to read all of the supplied instructions on operating your MoBike before starting off on you first ride.
Put your kick stand up. Release the clutch lock out lever by pulling the clutch lever in until the button pops up. Still holding your clutch lever all the way in start riding your bike until you reach a speed between 5 and 10 miles per hour. Once your moving along at a good clip let your clutch lever out. The motor may take some time 15 to 30 seconds before it starts as this is the first time it has been started.
When the motor starts give it gas by twisting the fuel throttle to give the engine more gas.
Once your bike motor is running steadily turn off the choke by sliding the carburator choke level all the way down. Now kick back and enjoy the ride!
|
