Installing your new MoBike Engine Kit
Page 1 of 13 Total Pages
Note: Mechanical aptitude and ability is required to perform this installation. Many “do it yourself” backyard mechanics will find this project rewarding. However, installation is sometimes best done by a professional mechanic. A rewarding joy and challenge can be found in designing a custom installation of your own. As with all motorized, power assisted, bikes it is essential that the front and rear wheels have good brakes to ensure safe operation. Front wheels with disc brakes are a good option and may be obtained at most bicycle shops. If your bike and motor drive kit are purchased from MoBike of America we offer complete support for any parts your need. Once you have your motor drive kit installed remember to break your engine in slowly with a rich oil to gas mixture following the Fuel Mixture Warning page instructions included with this manual. Remember, a quality installation and engine brake in with the right oil mix is paramount to safe usage and long engine life.
Important Warning
Obey all traffic information.
Always wear a helmet.
Remember that you are riding a motorized bicycle and other traffic may not be able to see you.
Never operate your motorized bicycle on a pedestrian through way on sidewalk while the engine is running.
Never unsafely operate your motorized bicycle.
You are responsible for knowing all state and local laws pertaining to operating a motorized bicycle.
Now have fun and good luck with your motorized bicycle project! ||
Pg1 ||
Pg2 ||
Pg3 ||
Pg4 ||
Pg5 ||
Pg6 ||
Pg7 ||
||
Pg8 ||
Pg9 ||
Pg10 ||
Pg11 ||
Pg12 ||
Pg13 || |
